FANUC Electric injection molding machine Clamp tonnage 500kN

Product Details

---

Electric injection molding machine Clamp tonnage 500kN (50ton class)

Electric injection molding machine, achieves high performance, high reliability, and high productivity with FANUC ROBOSHOT Si series.

  Injection molding data sheet


General Data

Machine Type: FRS 50iA
Screw Diameter: 28 MM
INJCT Spec. STANDARD
CLAMP Spec. STANDARD
EXTRD Spec. STANDARD
EJECT Spec. STANDARD
TEMP.(BRL) STANDARD
TEMP.(NZL) STD.1PC
Suitable for clean room classification: Class 10.000
US Fed. Standard 209 D: Class 1.000
Installation dimension: L 3.6 m x W 0.92 m x H 1.61 m
Required floor space: 3.3 m2
Net weight approx. 3.2 t
Floor load (static load, vertical direction): 1100 kg/m 2
Dynamic force: 4 kN
Atmosphere: No corrosive gases allowed


Clamping unit Specifications:

Tonnage: 500 kN (50 tonf)
Maximum die height: 350 mm
Minimum die height: 150 mm
Clamping stroke: 250 mm
Tie bar spacing (HxV): 360 mm / 320 mm
Platen size (HxV): 500 mm / 470 mm
Ejector point: 5/20
Ejector force: 2.0 tonf
Ejector stroke: 70 mm


Injection Unit

Adjustable barrel heating zones 6 incl. nozzle heating
Total heater capacity 8.92 kW


Motor rated power

Clamping movement 4.0 kW
Plasticizing 5.5 kW
Injection 5.5 kW


Electrical Power

Voltage: 3 x 400 V, PE, +/- 5 %
Frequency: 50 Hz / 60 Hz
Total connected power: < 35 KW
Power consumption: < 7 kW
Main circuit breaker: 50 A CEE
Connection / Power supply: L1, L2, L3, PE / 4 x 16mm